NSN MS27786-3

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.240 inches nominal actuator diameter, 1.706 inches maximum body height, up position momentary and down position momentary and center position maintained actuator position-action relationship, 0.660 inches minimum and 0.720 inches maximum actuator height, round actuator style.

NSN 5930-01-346-1675 Datasheet

(NSN) National Stock Number

5930-01-346-1675

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-346-1675

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Sat, Sep 28, 1991

Schedule B Code

8536509065

Actuator Height

0.660 inches minimum and 0.720 inches maximum

Actuator Diameter

0.240 inches nominal

Actuator Position-Action Relationship

up position momentary and down position momentary and center position maintained

Actuator Style

round

Body Height

1.706 inches maximum

Body Length

1.340 inches maximum

Body Style

bushing mount

Body Width

1.660 inches maximum

Bushing Length

0.470 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

7.500 amperes resistive dc and 7.500 amperes inductive dc and 4.000 amperes lamp dc and 7.500 amperes resistive ac and 7.500 amperes inductive ac and 2.000 amperes lamp ac

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

28.0 dc and 115.0 ac

Mounting Method

threaded bushing

Nominal Thread Size

0.469 inches

Nonpile-Up Contact Arrangement

4 pole, single throw, normally closed, momentary action single switch unit

Overall Height

2.836 inches minimum and 2.896 inches maximum

Overall Length

1.340 inches maximum

Overall Width

1.660 inches maximum

Specification/Standard Data

96906-ms27786 government standard

Terminal Type And Quantity

1 socket, integrated wire termination

Test Data Document

"81349-mil-s-3950 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a

Thread Quantity Per Inch

32

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-346-1675?

   The FSCG of the NSN 5930-01-346-1675 is 5930

2. Does the NSN 5930-01-346-1675 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-346-1675 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-346-1675 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-346-1675 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-346-1675 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sat, Sep 28, 1991