NSN MS28787-62

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1 connector, plug external connection contact type and quantity, solid state circuit construction type, 500.0 average life rating, hours average life measurement, rectangular or square basic shape style.

NSN 5963-01-074-2341 Datasheet

(NSN) National Stock Number

5963-01-074-2341

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5963 - Electronic Modules

(NIIN) National Item Identification Number

01-074-2341

Requires Demilitarization

Yes

(INC) Item Name Code

36647

Date

Wed, Mar 28, 1979

Schedule B Code

8542900000

Average Life Measurement

hours

Average Life Rating

500.0

Basic Shape Style

rectangular or square

Circuit Construction Type

solid state

Connection Contact Type And Quantity

1 connector, plug external

Control Type

remote

Environmental Protection

salt spray resistant and vibration

External Dc Operating Voltage In Volts

15.0 nominal 3rd voltage

External Dc Operating Voltage In Volts

5.0 nominal 2nd voltage

External Dc Operating Voltage In Volts

-15.0 nominal 1st voltage

Inclosure Type

encased

Installation Design

module

Operating Control Method

automatic

Operating Temp Range

+0.0 to 60.0 celsius

Overall Height

1.950 inches nominal

Overall Length

2.620 inches nominal

Overall Width

0.290 inches nominal

Signal Data Type Per Channel

1st output channel analog voltage

Signal Data Type Per Channel

2nd output channel analog voltage

Signal Data Type Per Channel

input channel analog voltage

Signal Voltage Rating Per Channel

1.500 volts maximum output

Signal Voltage Rating Per Channel

4.000 millivolts maximum input

Signal Voltage Rating Per Channel

400.000 millivolts maximum output

Special Markings

comparator,analog

Specification/Standard Data

81349-mil-m-28787/62 government specification

Storage Temp Range

-62.0 to 125.0 celsius

Test Data Document

"81349-mil-m-28787 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Type/Model Designation

cfa

Connection Type And Location

unable to decode

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0036647

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061480

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5963-01-074-2341?

   The FSCG of the NSN 5963-01-074-2341 is 5963

2. Does the NSN 5963-01-074-2341 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5963-01-074-2341 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5963-01-074-2341 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5963-01-074-2341 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5963-01-074-2341 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Mar 28, 1979