NSN MS3117-01AC

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

200.0 volts per mil /0.001 inch/ dielectric material voltage rating per unit thickness, corrosion resistant and flame resistant and mildew resistant and water resistant environmental protection, black color, flexible flexibility, unable to decode end largest diameter.

NSN 5970-01-302-1161 Datasheet

(NSN) National Stock Number

5970-01-302-1161

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-302-1161

Requires Demilitarization

Yes

(INC) Item Name Code

61626

Date

Sat, Jun 10, 1989

Schedule B Code

8546900000

Color

black

Dielectric Material Voltage Rating Per Unit Thickness

200.0 volts per mil /0.001 inch/

End Largest Diameter

unable to decode

Environmental Protection

corrosion resistant and flame resistant and mildew resistant and water resistant

Flexibility

flexible

Height

unable to decode

Large End Wall Thickness Of Main Body

unable to decode

Lip Height

unable to decode

Lip Width

unable to decode

Main Body Overall Length

unable to decode

Main Body Small End Inside Diameter

unable to decode

Main Body Large End Inside Diameter

unable to decode

Material Document And Classification

mil-i-81765/1,type ii mil spec single material response location not otherwise specified

Material

plastic cross-linked polyolefin location not otherwise specified

Minimum Tensile Strength

1200 pounds per square inch

Small End Wall Thickness Of Main Body

unable to decode

Special Features

inside adhesive coated; red color stripe; 4 drain holes

Style Designator

boot-90 degrees

Temp Rating

-55.0 celsius and 135.0 celsius

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061626

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-302-1161?

   The FSCG of the NSN 5970-01-302-1161 is 5970

2. Does the NSN 5970-01-302-1161 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-302-1161 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-302-1161 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-302-1161 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-302-1161 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sat, Jun 10, 1989