NSN MS35459-6

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.219 inches minimum and 0.250 inches maximum fastener length, hardness rating, flat chamfer head style, 0.218 inches minimum and 0.226 inches maximum head diameter, 0.134 inches minimum and 0.138 inches maximum head height.

NSN 5305-00-978-9346 Datasheet

(NSN) National Stock Number

5305-00-978-9346

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

00-978-9346

Requires Demilitarization

Yes

(INC) Item Name Code

16282

Date

Fri, Jan 1, 1960

Schedule B Code

7318152000

Fastener Length

0.219 inches minimum and 0.250 inches maximum

Hardness Rating

Head Diameter

0.218 inches minimum and 0.226 inches maximum

Head Height

0.134 inches minimum and 0.138 inches maximum

Head Style

flat chamfer

Internal Drive Style

hexagon

Material Document And Classification

unable to decode

Material

unable to decode

Minimum Tensile Strength

160000 pounds per square inch

Minimum Yield Strength

130000 pounds per square inch

Nominal Thread Diameter

0.138 inches

Surface Treatment Document And Classification

unable to decode

Surface Treatment

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.157 inches minimum and 0.219 inches maximum

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Width Across Flats

0.109 inches minimum and 0.111 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0016282

Cross Reference

CAGE Codes

A0199

Leonardo S.p.a. - Electronics Division - Defence Business Area

Non-us manufacturer (nato), other foreign organization or codification bureaus

02145

Richards Imagery Interpretation Systems, L.l.c.

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50600

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

096640

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-00-978-9346?

   The FSCG of the NSN 5305-00-978-9346 is 5305

2. Does the NSN 5305-00-978-9346 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-00-978-9346 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-00-978-9346 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5305-00-978-9346 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-00-978-9346 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960