NSN MS35647

A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.

5000 key change quantity, 1.250 inches nominal overall height, pin tumbler with dead bolt locking construction operating mechanism type, 1.500 inches nominal overall width, 0.750 inches nominal shackle clearance.

NSN 5340-00-582-2741 Datasheet

(NSN) National Stock Number

5340-00-582-2741

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-582-2741

Requires Demilitarization

Yes

(INC) Item Name Code

07678

Date

Tue, Jan 1, 1963

Schedule B Code

8301100000

Key Change Quantity

5000

Operating Mechanism Type

pin tumbler with dead bolt locking construction

Overall Height

1.250 inches nominal

Overall Width

1.500 inches nominal

Shackle Clearance

0.750 inches nominal

Shackle Diameter

0.240 inches minimum and 0.323 inches maximum

Special Features

cid a-a-1927 ty2

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

GSA - General services administration washington, d.c. 20406

Pseudo Item Name Code

0007678

Cross Reference

CAGE Codes

70019

Stanley Security Solutions, Inc Dba Best Lock

U.s./canadian manufacturers

80244

General Services Administration Federal Supply Service

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8301-10-0000

Description

padlocks of base metal

End Use

12300 - Finished metal shapes

Unit of Quantity

DOZ

USDA

Yes

(SITC) Standard International Trade Classification

69911

(NAICS) North American Industrial Classification System

332510

Questions & Answers

1. What is the FSCG of the NSN 5340-00-582-2741?

   The FSCG of the NSN 5340-00-582-2741 is 5340

2. Does the NSN 5340-00-582-2741 have a Schedule B code assigned?

   Yes, the Schedule B code is 8301100000

3. Does NSN 5340-00-582-2741 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-582-2741 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-00-582-2741 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-582-2741 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963