NATO Stock Number
5320-01-648-5275
Sold in multiples of
0 EA
DEMIL
Fastener Length
0.405 inches
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer)
Shank Diameter
Between 0.162 inches and 0.164 inches
Shank Style
Self-plugging mechanically locked stem
Head Major Diameter
0.333 inches
Expansion Device
Serrated stem-type w
Lubrication
Dry film
End Application
C5m fuselage
Grip Length
Between 0.219 inches and 0.282 inches
Min. Tensile Strength (psi)
1350 pounds per square inch
Hardness Rating
326.0 knoop and 466.0 knoop sleeve
Shear Strength
2340 single pounds per square inch
Countersink Angle
Between 99.0 degrees and 101.0 degrees
Part Name Assigned By Controlling Agency
Fastener, blind, high strength, pull type, positive mechanical lock, 100 degree flush head, alloy steel, 112 ksi fsu
Material
Steel comp 1010 or steel comp 1020 or steel comp 1144 or steel comp 4037 or steel comp 4130 or stainless steel or steel comp 316 mechanical lock
Material
Steel sleeve
Material
Steel stem
Material Specification
Air4127 national standard 1st material response or air4127 national standard 2nd material response or air4127 national standard 3rd material response or air4127 national standard 4th material response or air4127 national standard 5th material response or a286 cres iaw ams5737 national standard 6th material response or ams5690 national standard 7th material response mechanical lock
Material Specification
Astm a 108 assn standard single material response sleeve
Material Specification
Astm a 108 assn standard single material response stem
Surface Treatment
Cadmium or aluminum sleeve
Surface Treatment
Cadmium or aluminum stem
Surface Treatment
Cadmium or passivate or aluminum mechanical lock
Surface Treatment Specification
Ams-qq-p-416, type 1, class 3 w/hydrogen embrittlement relief per nas-81177 national standard 1st treatment response or mil-dtl-83488 government std/spec 2nd treatment response stem
Surface Treatment Specification
Ams-qq-p-416, type ii, class 2 national standard 1st treatment response or mil-dtl-83488 government std/spec 2nd treatment response sleeve
Surface Treatment Specification
Ams-qq-p-416, type ii, class (carbon and alloy steel) national standard 1st treatment response or ams2700, method 1, class 4(a286 and type 316 cres) national standard 2nd treatment response or mil-dtl-83488 government std/spec 3rd treatment response mechanical lock
Specification Data
80205-nas-90353 professional/industrial association standard
