NSN MS9601-010

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

one hole first leg hole arrangement style, 90.0 degrees nominal first leg angle, 0.245 inches minimum and 0.250 inches maximum first leg distance from edge to hole center along width, 0.500 inches nominal first leg end radius, 0.260 inches minimum and 0.270 inches maximum first leg hole diameter.

NSN 5340-00-147-6149 Datasheet

(NSN) National Stock Number

5340-00-147-6149

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-147-6149

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Fri, Oct 1, 1971

Schedule B Code

8302500000

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.245 inches minimum and 0.250 inches maximum

First Leg End Radius

0.500 inches nominal

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.260 inches minimum and 0.270 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.225 inches minimum and 0.235 inches maximum

First Leg Style

end radius

First Leg Thickness

0.056 inches minimum and 0.068 inches maximum

First Leg Width

0.500 inches nominal

First Leg Length

0.725 inches minimum and 0.735 inches maximum

Material Document And Classification

ams 5504 assn std single material response

Material

steel comp 410

Second Leg End Radius

0.500 inches nominal

Second Leg Hole Arrangement Style

one hole

Second Leg Hole Diameter

0.200 inches minimum and 0.210 inches maximum

Second Leg Length

0.945 inches minimum and 0.955 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.195 inches minimum and 0.205 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.245 inches minimum and 0.250 inches maximum

Second Leg Width

0.500 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

end radius

Second Leg Thickness

0.056 inches minimum and 0.068 inches maximum

Style Designator

angle

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-00-147-6149?

   The FSCG of the NSN 5340-00-147-6149 is 5340

2. Does the NSN 5340-00-147-6149 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-00-147-6149 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5340-00-147-6149 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-147-6149 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-147-6149 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Fri, Oct 1, 1971