NSN MTF102A

An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the packing, preformed or o-ring, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine packing material. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also packing nut and packing nut, stuffing tube.

gnd;mtf102a end item identification, is designed to mount one of the th series tuning heads which cover the frequency range of 1 to 12ghz;tuner frame supplies power required for tuninghead operation and provides a frequency translator for down converting the tuners 160mhz if output to an if of 21.4mhz;both 160mhz and 21.4mhz if outputs are available on rear panel bnc connectors;unit contains afc amplifier which enables an external demodulator to control the tuner afc function;front panel controls include power on off,fine tuning,and afc;unit mounts in 19in rack;3.5in vertical;16in deep;22watts w/tuning head installed;operating temperatures 0deg c to 50deg c general characteristics item description, "14632-mtf102a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)." test data document.

NSN 5985-00-615-2448 Datasheet

(NSN) National Stock Number

5985-00-615-2448

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-615-2448

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, Feb 12, 1975

Schedule B Code

8529109000

End Item Identification

gnd;mtf102a

General Characteristics Item Description

is designed to mount one of the th series tuning heads which cover the frequency range of 1 to 12ghz;tuner frame supplies power required for tuninghead operation and provides a frequency translator for down converting the tuners 160mhz if output to an if of 21.4mhz;both 160mhz and 21.4mhz if outputs are available on rear panel bnc connectors;unit contains afc amplifier which enables an external demodulator to control the tuner afc function;front panel controls include power on off,fine tuning,and afc;unit mounts in 19in rack;3.5in vertical;16in deep;22watts w/tuning head installed;operating temperatures 0deg c to 50deg c

Test Data Document

"14632-mtf102a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

XZZ -

Pseudo Item Name Code

1361290

Cross Reference

CAGE Codes

14632

Drs Signal Solutions, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HQ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

G - 125.0

National Motor Freight Class Rating

G - 125.0

Special Handling

Q - High sensitivity, category ii, aa&e, classified confidential

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

063035

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-615-2448?

   The FSCG of the NSN 5985-00-615-2448 is 5985

2. Does the NSN 5985-00-615-2448 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-615-2448 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-615-2448 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5985-00-615-2448 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-615-2448 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Wed, Feb 12, 1975