NSN MTI-5038

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

controlling agency:american electronic labs inc; mftr. classification:i and j band; envelope material:aluminum alloy; focus electrode provided; voltage for 60 db reduction of rf signal:1500v nom, below the cathode voltage; oper. voltage:minus 20 to minus 50 v; thermal switch normally closed and used to protect the tube from operation w/ excessive collector temp; contact rating is dry circuit oper. or 0.5 amp resistive a 28vdc; min op. temp 168c; ambient air op. temp minus 54 to 100 c; oper. chillplate 95c max; tube is capable of performing at relative humidity varying from 5 to 100 pct including condensation at any temp. up to 50c; min. op. life 5000 hrs; rf power 450w; cathode current 300ma max; filament voltage 6.1 to 6.5 vrms; filament warm-up time 13.0 min.; total dc input power 1205w max special features, traveling wave tube type, application data:amplifier assy,power supply assy fleet electronic warfare support group peculiar equip end item identification, 1451693-1 specification no. identifying number, 8.00 gigahertz minimum and 17.00 gigahertz maximum frequency range.

NSN 5960-01-341-9291 Datasheet

(NSN) National Stock Number

5960-01-341-9291

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5960 - Electron Tubes and Associated Hardware

(NIIN) National Item Identification Number

01-341-9291

Requires Demilitarization

Yes

(INC) Item Name Code

00001

Date

Thu, Jul 11, 1991

Schedule B Code

8540890020

End Item Identification

application data:amplifier assy,power supply assy fleet electronic warfare support group peculiar equip

Frequency Range

8.00 gigahertz minimum and 17.00 gigahertz maximum

Identifying Number

1451693-1 specification no.

Special Features

controlling agency:american electronic labs inc; mftr. classification:i and j band; envelope material:aluminum alloy; focus electrode provided; voltage for 60 db reduction of rf signal:1500v nom, below the cathode voltage; oper. voltage:minus 20 to minus 50 v; thermal switch normally closed and used to protect the tube from operation w/ excessive collector temp; contact rating is dry circuit oper. or 0.5 amp resistive a 28vdc; min op. temp 168c; ambient air op. temp minus 54 to 100 c; oper. chillplate 95c max; tube is capable of performing at relative humidity varying from 5 to 100 pct including condensation at any temp. up to 50c; min. op. life 5000 hrs; rf power 450w; cathode current 300ma max; filament voltage 6.1 to 6.5 vrms; filament warm-up time 13.0 min.; total dc input power 1205w max

Tube Type

traveling wave

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000001

Cross Reference

CAGE Codes

93346

Caes Systems Llc

U.s./canadian manufacturers

11312

Teledyne Defense Electronics, Llc Dba Teledyne Microwave Solutions Div Teledyne Mec

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35396

Water Commodity

654 - Tubes, x-ray

National Motor Freight Classification Item Number

063476

Schedule B & Trade

Schedule B

8540-89-0020

Description

gas and vapor electron tubes, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77627

(NAICS) North American Industrial Classification System

334419

Questions & Answers

1. What is the FSCG of the NSN 5960-01-341-9291?

   The FSCG of the NSN 5960-01-341-9291 is 5960

2. Does the NSN 5960-01-341-9291 have a Schedule B code assigned?

   Yes, the Schedule B code is 8540890020

3. Does NSN 5960-01-341-9291 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5960-01-341-9291 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5960-01-341-9291 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5960-01-341-9291 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Jul 11, 1991