NSN MTL17-1007

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

high tie rod part name assigned by controlling agency, pickup truck, 4x4 end item identification, over the pinion special features.

NSN 2530-01-644-9848 Datasheet

(NSN) National Stock Number

2530-01-644-9848

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

01-644-9848

Requires Demilitarization

Yes

(INC) Item Name Code

15952

Date

Fri, May 29, 2015

Schedule B Code

8708295170

End Item Identification

pickup truck, 4x4

Part Name Assigned By Controlling Agency

high tie rod

Special Features

over the pinion

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015952

Cross Reference

CAGE Codes

27188

Marmon-Herrington Company

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 2530-01-644-9848?

   The FSCG of the NSN 2530-01-644-9848 is 2530

2. Does the NSN 2530-01-644-9848 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708295170

3. Does NSN 2530-01-644-9848 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-01-644-9848 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2530-01-644-9848 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-01-644-9848 was assigned to the Federal Catalog?

   It was assigned 11 years ago, on Fri, May 29, 2015