NSN N15707C

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

deactuation point not adjustable and actuation point not adjustable contact adjustability, 0.680 inches nominal body length, threaded stud(s) mounting method, increase contact action stimulus, gas or liquid media for which designed.

NSN 5930-00-983-4264 Datasheet

(NSN) National Stock Number

5930-00-983-4264

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-983-4264

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Mon, Jan 1, 1962

Schedule B Code

8536509065

Body Length

0.680 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

deactuation point not adjustable and actuation point not adjustable

Media For Which Designed

gas or liquid

Mounting Method

threaded stud(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, both positions maintained

Overall Diameter

1.690 inches nominal

Overall Length

2.125 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

absolute

Style Designator

cylindrical

Terminal Type

tab w/screw

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

92679

Navistar Intl Corp Melrose Park Engine Plant Location /melrose Park/

U.s./canadian manufacturers

06721

Haldex Brake Products Corporation

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-983-4264?

   The FSCG of the NSN 5930-00-983-4264 is 5930

2. Does the NSN 5930-00-983-4264 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-983-4264 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-983-4264 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-983-4264 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-983-4264 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962