NSN N178374

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

white single indicator single range background color, 2 threaded stud circuit attachment method and quantity, unable to decode accuracy in percent, unable to decode dial scale marking color, ac circuit current for which designed.

NSN 6625-00-232-1116 Datasheet

(NSN) National Stock Number

6625-00-232-1116

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-232-1116

Requires Demilitarization

Yes

(INC) Item Name Code

16449

Date

Tue, Jan 1, 1963

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

ac

Dial Scale Marking Color

unable to decode

Dielectric Withstanding Voltage In Volts

2600.0

Environmental Protection

dust resistant

Features Provided

knife edge pointer and zero adjuster

Frequency Response Range

+25.000 to 125.000 hertz

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

nut 6; washer 4

Indicator Type

dial w/pointer

Installation Design

panel

Material

plastic

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.760 inches nominal

Meter Depth Behind Mounting Flange

1.610 inches nominal

Mounting Arrangement Style

three hole/stud bolt circle

Mounting Bolt Circle Diameter

3.160 inches nominal

Mounting Hole Diameter

0.156 inches nominal

Mounting Facility Type And Quantity

3 unthreaded hole(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving iron vane

Nuclear Hardness Critical Feature

nonhardened

Overall Diameter

3.510 inches nominal

Overall Length

2.720 inches nominal

Pointer Color

unable to decode

Power Source

external

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Scale Selection Method

terminal

Sensitivity Rating

4.0 milliamperes

Special Features

ruggedized

Style Designator

round flush mtg

Supplementary Features

2 sec response time

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016449

Cross Reference

CAGE Codes

65092

Solartron Electronics Inc Weston Instruments Div

U.s./canadian manufacturers

33005

Jewell Instruments Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-232-1116?

   The FSCG of the NSN 6625-00-232-1116 is 6625

2. Does the NSN 6625-00-232-1116 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-232-1116 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-232-1116 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-232-1116 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-232-1116 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963