NSN NAS1523C08E

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.370 inches minimum and 0.395 inches maximum outside diameter, material, 0.146 inches minimum and 0.166 inches maximum packing inside diameter, unable to decode material document and classification, one-piece construction.

NSN 5330-00-367-5467 Datasheet

(NSN) National Stock Number

5330-00-367-5467

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-367-5467

Requires Demilitarization

Yes

(INC) Item Name Code

05680

Date

Wed, Feb 27, 1974

Schedule B Code

3926904500

Construction

one-piece

Material Document And Classification

unable to decode

Material

Outside Diameter

0.370 inches minimum and 0.395 inches maximum

Packing Inside Diameter

0.146 inches minimum and 0.166 inches maximum

Packing Ring Cross-Sectional Diameter

0.047 inches minimum and 0.053 inches maximum

Retainer Thickness

0.036 inches minimum and 0.044 inches maximum

Specification/Standard Data

80205-nas 1523 professional/industrial association standard

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005680

Cross Reference

CAGE Codes

56232

Lockheed Martin Corporation Div Rms - Mitchel Field

Non-manufacturers

89944

Elbitamerica, Inc.

U.s./canadian manufacturers

80205

National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-367-5467?

   The FSCG of the NSN 5330-00-367-5467 is 5330

2. Does the NSN 5330-00-367-5467 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-00-367-5467 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-367-5467 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-367-5467 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-367-5467 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Wed, Feb 27, 1974