NSN NC1730

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

hermetically sealed and w/resistor and monolithic and positive outputs features provided, 0.260 inches maximum body width, 1 multivibrator, monostable design function and quantity, 0.050 inches nominal body height, 0.260 inches nominal body length.

NSN 5962-00-113-1333 Datasheet

(NSN) National Stock Number

5962-00-113-1333

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

00-113-1333

Requires Demilitarization

Yes

(INC) Item Name Code

31779

Date

Wed, Aug 28, 1968

Schedule B Code

8542900000

Body Height

0.050 inches nominal

Body Length

0.260 inches nominal

Body Width

0.260 inches maximum

Design Function And Quantity

1 multivibrator, monostable

Features Provided

hermetically sealed and w/resistor and monolithic and positive outputs

Inclosure Configuration

flat pack

Inclosure Material

ceramic

Input Circuit Pattern

2 input

Operating Temp Range

-55.0 to 125.0 celsius

Output Logic Form

diode-transistor logic

Precious Material

gold

Precious Material And Location

terminal surfaces gold

Storage Temp Range

-65.0 to 150.0 celsius

Terminal Surface Treatment

gold

Terminal Type And Quantity

14 flat leads

Test Data Document

81413-224092-000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Time Rating Per Chacteristic

50.00 nanoseconds maximum propagation delay time, low to high level output and 50.00 nanoseconds maximum propagation delay time, high to low level output

Voltage Rating And Type Per Characteristic

8.0 volts maximum power source

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0031779

Cross Reference

CAGE Codes

81413

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

07263

Fairchild Semiconductor Corp

U.s./canadian manufacturers

14433

Itt Semiconductors Div

U.s./canadian manufacturers

27318

Stewart-Warner Corp Microcircuits Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-00-113-1333?

   The FSCG of the NSN 5962-00-113-1333 is 5962

2. Does the NSN 5962-00-113-1333 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-00-113-1333 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-00-113-1333 contain precious materials?

   Item contains gold.

5. Does NSN 5962-00-113-1333 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-00-113-1333 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Aug 28, 1968