NSN NES-4107

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

3.000 inches maximum body width, 6.250 inches maximum body length, center to center distance between mounting facilities parallel to width, center to center distance between mounting facilities parallel to length, unable to decode frequency rating.

NSN 5950-00-237-1073 Datasheet

(NSN) National Stock Number

5950-00-237-1073

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-237-1073

Requires Demilitarization

Yes

(INC) Item Name Code

32496

Date

Mon, Oct 26, 1970

Body Length

6.250 inches maximum

Body Width

3.000 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

Center To Center Distance Between Mounting Facilities Parallel To Width

Frequency Rating

unable to decode

Inclosure Type

fully inclosed

Input-Output Phase Relationship

Maximum Operating Temp

170.0 celsius

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Overall Height

4.875 inches maximum

Reliability Indicator

not established

Special Features

one primary winding and nine secondary windings

Terminal Type And Quantity

37 tab, solder lug

Test Data Document

18876-10668614 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Thread Series Designator

unable to decode

Transformer Winding Connection Type

delta-delta

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Operating Voltage

unable to decode

Winding Power Rating

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032496

Cross Reference

CAGE Codes

18876

Us Army Aviation and Missile Command

Government departments or units, including military organizations

51181

Keytronics, Inc. Div Api Technologies Corp- Magnetics

U.s./canadian manufacturers

86632

Newton Engineering Service Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-237-1073?

   The FSCG of the NSN 5950-00-237-1073 is 5950

2. Does NSN 5950-00-237-1073 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-00-237-1073 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5950-00-237-1073 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-00-237-1073 was assigned to the Federal Catalog?

   It was assigned 55 years ago, on Mon, Oct 26, 1970