NSN NMC 10DR-6

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5975-01-683-8581, nonmetallic raceway assembly.

NSN 5975-01-683-8581 Datasheet

(NSN) National Stock Number

5975-01-683-8581

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-683-8581

Requires Demilitarization

Yes

(INC) Item Name Code

41847

Date

Thu, Oct 10, 2019

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0041847

Cross Reference

CAGE Codes

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

03296

Nmc Group, Inc.

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34855

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062330

Questions & Answers

1. What is the FSCG of the NSN 5975-01-683-8581?

   The FSCG of the NSN 5975-01-683-8581 is 5975

2. Does NSN 5975-01-683-8581 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5975-01-683-8581 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5975-01-683-8581 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5975-01-683-8581 was assigned to the Federal Catalog?

   It was assigned 6 years ago, on Thu, Oct 10, 2019