NSN P5100C1

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

48.000 inches nominal length, 1500 pounds per square inch minimum tensile strength, ams 3651 assn std 1st material response material document and classification, plastic polytetrafluoroethylene material, cementable one side special features.

NSN 9330-01-232-1083 Datasheet

(NSN) National Stock Number

9330-01-232-1083

(FSG) Federal Supply Group

93 - Nonmetallic Fabricated Materials

(FSC) Federal Supply Classification

9330 - Plastics Fabricated Materials

(NIIN) National Item Identification Number

01-232-1083

Requires Demilitarization

Yes

(INC) Item Name Code

18304

Date

Thu, May 8, 1986

Length

48.000 inches nominal

Material Document And Classification

ams 3651 assn std 1st material response

Material

plastic polytetrafluoroethylene

Minimum Tensile Strength

1500 pounds per square inch

Special Features

cementable one side

Thickness

0.125 inches nominal

Width

48.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0018304

Cross Reference

CAGE Codes

1ECV7

Saint-Gobain Performance Plastics Corp Div Composites

U.s./canadian manufacturers

04394

Rogers Corp

U.s./canadian manufacturers

65027

Rogers Corp Div Cpm

U.s./canadian manufacturers

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

SZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

45955

Water Commodity

734 - Office machines (typewriters, adding machines, etc)

National Motor Freight Classification Item Number

086700

Questions & Answers

1. What is the FSCG of the NSN 9330-01-232-1083?

   The FSCG of the NSN 9330-01-232-1083 is 9330

2. Does NSN 9330-01-232-1083 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 9330-01-232-1083 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 9330-01-232-1083 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 9330-01-232-1083 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Thu, May 8, 1986