NSN PB060101

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode contact voltage rating in volts, 0.688 inches nominal distance between mounting facility centers, unable to decode frequency in hertz, unable to decode contact load current rating, two position in-line mounting facility pattern.

NSN 5930-00-898-5348 Datasheet

(NSN) National Stock Number

5930-00-898-5348

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-898-5348

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Fri, Jan 1, 1960

Schedule B Code

8536509065

Contact Load Current Rating

unable to decode

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

0.688 inches nominal

Frequency In Hertz

unable to decode

Mounting Facility Pattern

two position in-line

Mounting Method

base and threaded hole(s)

Overall Height

2.641 inches nominal

Overall Length

2.469 inches nominal

Overall Width

1.000 inches nominal

Terminal Type

tab w/screw

Thread Quantity Per Inch

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

10018

Avaho Acquisition Corp Dba Impac

U.s./canadian manufacturers

92578

Johnson Controls Inc Control Products Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-898-5348?

   The FSCG of the NSN 5930-00-898-5348 is 5930

2. Does the NSN 5930-00-898-5348 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-898-5348 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-898-5348 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-00-898-5348 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-898-5348 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960