NSN PC40H180

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.984 inches nominal body length, 1.000 inch-ounces minimum and 10.000 inch-ounces maximum adjustment device torque, 0.190 inches nominal bushing diameter, piston body style, 1 slotted screw adjustment device drive type and quantity.

NSN 5910-00-924-4205 Datasheet

(NSN) National Stock Number

5910-00-924-4205

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-924-4205

Requires Demilitarization

Yes

(INC) Item Name Code

00532

Date

Thu, Jan 20, 1966

Schedule B Code

8532290040

Adjustment Device Drive Type And Quantity

1 slotted screw

Adjustment Device Torque

1.000 inch-ounces minimum and 10.000 inch-ounces maximum

Body Length

0.984 inches nominal

Body Style

piston

Bushing Diameter

0.190 inches nominal

Bushing Length

0.281 inches nominal

Bushing Shape

round w/flat

Bushing Width

0.167 inches nominal

Capacitance Drift In Picofarads

unable to decode

Capacitance Range In Picofarads

unable to decode

Inclosure Type

encased

Insulation Dc Resistance At 25 Deg Celsius

100.0 gigohms

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.190 inches

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Voltage Rating And Type

unable to decode

Overall Diameter

0.312 inches nominal

Quality Factor At 25 Deg Celsius

500.0

Temp Coefficient Of Capacitance Range In Ppm Per Deg Celsius

unable to decode

Terminal Type And Quantity

1 wire lead

Test Data Document

"81349-mil-c-14409 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000532

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-924-4205?

   The FSCG of the NSN 5910-00-924-4205 is 5910

2. Does the NSN 5910-00-924-4205 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-924-4205 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-924-4205 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-924-4205 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-924-4205 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Thu, Jan 20, 1966