NSN PCU-100A

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

pwr sply ctrl unit part name assigned by controlling agency, 275546-01(09xp2)688 icadf a(v)2/a(v)4 end item identification.

NSN 6130-01-540-7981 Datasheet

(NSN) National Stock Number

6130-01-540-7981

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6130 - Nonrotating Electrical Converters

(NIIN) National Item Identification Number

01-540-7981

Requires Demilitarization

Yes

(INC) Item Name Code

00932

Date

Sat, Jun 3, 2006

Schedule B Code

8504409580

End Item Identification

275546-01(09xp2)688 icadf a(v)2/a(v)4

Part Name Assigned By Controlling Agency

pwr sply ctrl unit

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000932

Cross Reference

CAGE Codes

1SHJ3

Radio Design Group, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061480

Questions & Answers

1. What is the FSCG of the NSN 6130-01-540-7981?

   The FSCG of the NSN 6130-01-540-7981 is 6130

2. Does the NSN 6130-01-540-7981 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504409580

3. Does NSN 6130-01-540-7981 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 6130-01-540-7981 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6130-01-540-7981 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 6130-01-540-7981 was assigned to the Federal Catalog?

   It was assigned 20 years ago, on Sat, Jun 3, 2006