NSN PD02LEEC86

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

minimum requirements are as follows: shall be class 1 in accordance with mil-prf-28800; shall be solid state and enclosed to prevent electrical shock, shall be capable of operating in the vicinity of aircraft, vehicles and above deck applications, warm up time will not exceed 30 minutes, shall produce dc voltages, ac voltages, frequency, shall have wideband capability of 10hz to 30mhz at 3mv to 3.5v rms, shall produce dc current from 220ua to 2.2a, shall produce ac current from 220ua to 2.2a, shall provide resitance of 1 ohm to 100 megaohms in a 1 - 1.9 sequence, resistors shall not be damaged or degraded by the peak currents listed in the purchase description, shall have ieee-488-1978 and be addressable from the rear panel, height will not exceed 7in, depth will be 22.75in from rear face of the rackmount, calibrator plus rack mounting shall fit in standard eia 19 in rack, controls, handles and fittings will not project more than 2 1/8 in from rear face of rackmount special features.

NSN 6625-01-552-5368 Datasheet

(NSN) National Stock Number

6625-01-552-5368

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-552-5368

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Jun 15, 2007

Schedule B Code

9030890100

Special Features

minimum requirements are as follows: shall be class 1 in accordance with mil-prf-28800; shall be solid state and enclosed to prevent electrical shock, shall be capable of operating in the vicinity of aircraft, vehicles and above deck applications, warm up time will not exceed 30 minutes, shall produce dc voltages, ac voltages, frequency, shall have wideband capability of 10hz to 30mhz at 3mv to 3.5v rms, shall produce dc current from 220ua to 2.2a, shall produce ac current from 220ua to 2.2a, shall provide resitance of 1 ohm to 100 megaohms in a 1 - 1.9 sequence, resistors shall not be damaged or degraded by the peak currents listed in the purchase description, shall have ieee-488-1978 and be addressable from the rear panel, height will not exceed 7in, depth will be 22.75in from rear face of the rackmount, calibrator plus rack mounting shall fit in standard eia 19 in rack, controls, handles and fittings will not project more than 2 1/8 in from rear face of rackmount

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1801761

Cross Reference

CAGE Codes

98752

Warner Robins Air Logistics Center

U.s./canadian manufacturers

Freight Information

Air Commodity

HQ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

738 - Computing equipment, computer components, and circuit cards

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-89-0100

Description

instruments and apparatus without a recording device specially designed for telecommunications, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87478

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-552-5368?

   The FSCG of the NSN 6625-01-552-5368 is 6625

2. Does the NSN 6625-01-552-5368 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030890100

3. Does NSN 6625-01-552-5368 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-552-5368 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-552-5368 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-552-5368 was assigned to the Federal Catalog?

   It was assigned 19 years ago, on Fri, Jun 15, 2007