NSN PD3043

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

5930-01-079-9932, liquid level switch.

NSN 5930-01-079-9932 Datasheet

(NSN) National Stock Number

5930-01-079-9932

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-079-9932

Requires Demilitarization

Yes

(INC) Item Name Code

37187

Date

Wed, Jul 18, 1979

Schedule B Code

8413919520

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0037187

Cross Reference

CAGE Codes

96046

Crane Pumps & Systems Pft Corp Div Crane Pumps & System Pft Corp.

U.s./canadian manufacturers

0K232

Dyna-Air Engineering Corp

U.s./canadian manufacturers

47WD8

Evac North America Inc

U.s./canadian manufacturers

58568

Envirovac Inc Dba Monogram Systems-Rockford Div

U.s./canadian manufacturers

47876

Pneumercator Company, Inc.

U.s./canadian manufacturers

0DMF4

Comus International, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8413-91-9520

Description

parts, nesoi, of pumps for liquids

End Use

21100 - Industrial engines

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74291

(NAICS) North American Industrial Classification System

333914

Questions & Answers

1. What is the FSCG of the NSN 5930-01-079-9932?

   The FSCG of the NSN 5930-01-079-9932 is 5930

2. Does the NSN 5930-01-079-9932 have a Schedule B code assigned?

   Yes, the Schedule B code is 8413919520

3. Does NSN 5930-01-079-9932 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-079-9932 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-079-9932 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-079-9932 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Jul 18, 1979