NSN PGF12366

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

v cross-sectional shape style, 0.412 inches nominal cross-sectional height, unable to decode hardness rating, unable to decode joint type, 1.250 inches nominal center hole diameter.

NSN 5330-00-255-0382 Datasheet

(NSN) National Stock Number

5330-00-255-0382

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-255-0382

Requires Demilitarization

Yes

(INC) Item Name Code

04521

Date

Tue, Jan 1, 1963

Schedule B Code

3926904500

Center Hole Diameter

1.250 inches nominal

Cross-Sectional Shape Style

v

Cross-Sectional Height

0.412 inches nominal

Hardness Rating

unable to decode

Joint Type

unable to decode

Material

Peripheral Diameter

2.250 inches nominal

Rim Surface Width

0.187 inches minimum and 0.207 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0004521

Cross Reference

CAGE Codes

F6573

Arquus

Non-us manufacturer (nato), other foreign organization or codification bureaus

81336

Chief of Engineers Dept of Army

U.s./canadian manufacturers

1X0J7

Volvo Construction Equipment North America, Llc

U.s./canadian manufacturers

40152

Vme Americas Inc Sub of Vme Group N V

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-255-0382?

   The FSCG of the NSN 5330-00-255-0382 is 5330

2. Does the NSN 5330-00-255-0382 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-00-255-0382 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-255-0382 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-255-0382 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-255-0382 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963