NSN PH0072

A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes:filter element, air conditioning. See also strainer element, sediment.

unthreaded hole(s) mounting method, 0.500 inches nominal loop/holding dimension, 0.375 inches nominal loop/holding smaller dimension, color black special features, 1.240 inches nominal length.

NSN 5340-01-342-5895 Datasheet

(NSN) National Stock Number

5340-01-342-5895

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-342-5895

Requires Demilitarization

Yes

(INC) Item Name Code

20815

Date

Fri, Jul 26, 1991

Schedule B Code

7326908630

Length

1.240 inches nominal

Loop/Holding Dimension

0.500 inches nominal

Loop/Holding Smaller Dimension

0.375 inches nominal

Mounting Method

unthreaded hole(s)

Special Features

color black

Width

1.120 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020815

Cross Reference

CAGE Codes

05331

Lull Lift Corp Dba Omniquip Parts Worldwide

U.s./canadian manufacturers

1YHH8

Jlg Industries, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7326-90-8630

Description

hangers and similar supports for tubes and pipes, of iron or steel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69969

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-01-342-5895?

   The FSCG of the NSN 5340-01-342-5895 is 5340

2. Does the NSN 5340-01-342-5895 have a Schedule B code assigned?

   Yes, the Schedule B code is 7326908630

3. Does NSN 5340-01-342-5895 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-342-5895 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-342-5895 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-342-5895 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, Jul 26, 1991