NSN PH1904-1C2B

An item consisting of an electrically conductive material designed to furnish a surface which will physically and electrically meet another conducting surface for the purpose of transferring electrical energy and/or opening and closing circuits. Includes moving contacts which make and/or slide over stationary contacts or other stationary conductive material to a resulting fixed position. Excludes:items which are used in conjunction with continually moving surfaces or which make contact by gripping action of the contact surfaces. See also clip, electrical; clamp, electrical; brush, electrical contact; plug, tip; and jack, tip.

1.812 inches nominal body length, 1.900 microfarads single section capacitance value per section, 1.000 inches nominal body diameter, plastic case insulation material, w/o mtg facilities, axial terminals body style.

NSN 5910-00-824-9115 Datasheet

(NSN) National Stock Number

5910-00-824-9115

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-824-9115

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Wed, Aug 16, 1967

Schedule B Code

8532250080

Body Diameter

1.000 inches nominal

Body Length

1.812 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

1.900 microfarads single section

Case Insulation Material

plastic

Dielectric Material

plastic polystyrene

Features Provided

hermetically sealed case

Internal Electrical Connection Type

extended foil

Insulation Resistance At Reference Temp

1000000.0 megohms

Nonderated Operating Temp

-65.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Power Factor At Reference Temp In Percent

0.0002

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

100.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-40.0 to 40.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

00213

Struthers-Dunn Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-824-9115?

   The FSCG of the NSN 5910-00-824-9115 is 5910

2. Does the NSN 5910-00-824-9115 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-824-9115 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-824-9115 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-824-9115 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-824-9115 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Wed, Aug 16, 1967