NATO Stock Number
5990-00-503-0387
Sold in multiples of
EA
DEMIL
NO
Body Material
Aluminum
Body Style
Standard round d
Shoulder Diameter
Between 1.9940 inches and 1.9950 inches
Pilot Diameter
Between 0.5990 inches and 0.6000 inches
Second Shoulder Diameter
1.9985 mils and 1.9995 centimeters
Second Shoulder Length
0.1700 mils and 0.1720 centimeters
Overall Length
Between 4.7430 inches and 4.8550 inches
Flange Diameter
Between 2.2490 inches and 2.2500 inches
Flange Thickness
Between 0.2480 inches and 0.2500 inches
Body Diameter
1.9840 inches
Shaft Diameter
0.2400 inches single shaft and 0.2405 inches single shaft
Shaft Length
0.6100 inches single shaft and 0.6300 inches single shaft
Body Size
23
Stator Input Voltage Rating In Volts
Between 8.0 and 50.0
Stator Input Current Rating
40.0 milliamperes
Stator Input Electrical Power Rating
200.0 milliwatts
Frequency In Hertz
60.0
Zso Impedance Magnitude In Ohms
570.00
Zso Impedance Angle In Deg
79.00
Rotor Dc Resistance In Ohms
Between 260.30 and 287.70
Stator Dc Resistance In Ohms
Between 72.96 and 80.43
Phase Shift Angle In Deg
Between 7.164 input to output and 7.236 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt
0.02 output
Shaft End Play
0.0060 inches
Pilot Length
0.0430 inches
Shoulder Length
0.4190 mils and 0.4200 centimeters
Aft Of First Flange Diameter
Between 1.9940 inches and 1.9950 inches
Mounting Surface To Terminal End Distance
3.6170 inches
Shaft Maximum Runout
0.0020 inches
Shaft Thread Series Designator
Unf single shaft
Shaft Thread Direction
Right-hand single shaft
Shaft Thread Class
3a single shaft
Terminal Location
Rear
Shaft Thread Length
0.3100 inches single shaft and 0.3400 inches single shaft
Shaft Type
Round, threaded single shaft
Shaft Thread Size
0.240 inches single shaft
Shaft End Play Determining Weight
16.0 ounces
Test Data Document
10001-1233385 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
8 screw
