NSN PLF1MA-C

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

natural color, tie down buckle style designator, w/attachment end type, plain end type, buckle end attachment/fastening facility.

NSN 5975-01-497-2105 Datasheet

(NSN) National Stock Number

5975-01-497-2105

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-497-2105

Requires Demilitarization

Yes

(INC) Item Name Code

61736

Date

Mon, May 13, 2002

Schedule B Code

8543909000

Buckle Style Designator

tie down

Color

natural

End Attachment/Fastening Facility

buckle

End Type

plain

End Type

w/attachment

Length

5.100 inches nominal

Material

plastic polyamide nylon buckle

Material

plastic polyamide nylon location not otherwise specified

Minimum Tensile Strength

18 pounds per square inch

Special Features

self locking

Specific Usage Design

used to fasten and identify wire bundles for attaching to wall, ceiling or control panel; allows cable bundling before or after clamp tie is screwed into place

Width

0.098 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0061736

Cross Reference

CAGE Codes

06383

Panduit Corp.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

156600

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-01-497-2105?

   The FSCG of the NSN 5975-01-497-2105 is 5975

2. Does the NSN 5975-01-497-2105 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-01-497-2105 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-497-2105 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-497-2105 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-497-2105 was assigned to the Federal Catalog?

   It was assigned 24 years ago, on Mon, May 13, 2002