NSN PM21415

An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.

1.875 inches minimum and 1.885 inches maximum fastener length, fillister head style, 0.118 inches nominal head height, slot internal drive style, 0.313 inches nominal head diameter.

NSN 5305-01-080-1701 Datasheet

(NSN) National Stock Number

5305-01-080-1701

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-080-1701

Requires Demilitarization

Yes

(INC) Item Name Code

06657

Date

Fri, Jul 20, 1979

Schedule B Code

7318152000

Fastener Length

1.875 inches minimum and 1.885 inches maximum

Head Height

0.118 inches nominal

Head Diameter

0.313 inches nominal

Head Style

fillister

Internal Drive Style

slot

Nominal Thread Diameter

0.190 inches

Screw Material Document And Classification

qq-s-637 fed spec single material response

Screw Material

steel

Screw Surface Treatment Document And Classification

qq-p-416,type 2 cl 3 fed spec single treatment response

Screw Surface Treatment

cadmium and chromate

Thread Class

2a

Thread Direction

right-hand

Thread Length

0.500 inches minimum and 0.550 inches maximum

Thread Quantity Per Inch

32

Thread Series Designator

unf

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0006657

Cross Reference

CAGE Codes

60674

Microwave Devices Inc

U.s./canadian manufacturers

74868

Amphenol Corporation Div Amphenol Rf

U.s./canadian manufacturers

81579

Mason Electric Co. Dba Mason Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-080-1701?

   The FSCG of the NSN 5305-01-080-1701 is 5305

2. Does the NSN 5305-01-080-1701 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-080-1701 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-080-1701 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5305-01-080-1701 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-080-1701 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Fri, Jul 20, 1979