NSN PM49-7

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode connection type and voltage rating in volts, nonventilated cooling method, load current rating method, intermittent duty cycle, unable to decode current rating in amps.

NSN 6105-01-015-0318 Datasheet

(NSN) National Stock Number

6105-01-015-0318

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6105 - Electrical Motors

(NIIN) National Item Identification Number

01-015-0318

Requires Demilitarization

Yes

(INC) Item Name Code

16350

Date

Tue, Jan 13, 1976

Connection Type And Voltage Rating In Volts

unable to decode

Cooling Method

nonventilated

Current Rating In Amps

unable to decode

Current Rating Method

load

Duty Cycle

intermittent

Enclosure Feature

explosion proof

Inclosure Specification

commercial

Length Of Shaft From Housing

unable to decode

Maximum Operating Altitude Rating

40000.0 feet

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Mounting Method

pad

Nominal Center To Center Distance Between Mounting Facilities Parallel To Height

1.344 inches

Nominal Center To Center Distance Between Mounting Facilities Parallel To Width

1.344 inches

Overall Length

4.830 inches

Overall Width

1.625 inches

Rotor Speed Rating In Rpm

7500.0 single full load

Shaft Diameter

unable to decode

Shaft End Characteristic

unable to decode

Shaft Rotation Direction

unable to decode

Spline Length

unable to decode

Spline Minor Diameter

unable to decode

Spline Quantity

unable to decode

Temp Rating

-65.0 operating celsius and 160.0 operating celsius

Terminal Type And Quantity

2 wire lead

Torque Rating And Type

2.1 inch-pounds stalled

Winding Type

permanent magnet

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0016350

Cross Reference

CAGE Codes

98889

Aerocontrolex Group, Inc. Div Talley Actuators

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

062120

Questions & Answers

1. What is the FSCG of the NSN 6105-01-015-0318?

   The FSCG of the NSN 6105-01-015-0318 is 6105

2. Does NSN 6105-01-015-0318 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

3. Does NSN 6105-01-015-0318 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6105-01-015-0318 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6105-01-015-0318 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Jan 13, 1976