NSN PP16-1-3.00A-XX-S

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

1 alarm auxiliary switch function and quantity, trip-reset actuator function, f-15i lantirn end item identification, 1.375 inches nominal body length, at pole one actuator position designation.

NSN 5925-01-446-4789 Datasheet

(NSN) National Stock Number

5925-01-446-4789

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-446-4789

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, Jul 3, 1997

Schedule B Code

8536200040

End Item Identification

f-15i lantirn

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Auxiliary Switch Function And Quantity

1 alarm

Body Length

1.375 inches nominal

Body Style

single pole type

Body Width

0.680 inches nominal

Bushing Length

0.400 inches nominal

Center To Center Distance Between Terminals Parallel To Length

1.125 inches nominal

Circuit Protection Type

overcurrent single location

Frequency In Hertz

50.0 or 60.0 single location

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

3.0 amperes ac single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

27.0 ac single location

Mounting Facility Type And Quantity

1 threaded bushing

Mounting Surface To Terminal End Distance

1.960 inches nominal

Nominal Thread Size

0.375 inches

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac and 50.0 dc single location

Pole Quantity

1

Reset Method

manual

Switch Location And Position Designation

external at pole one

Switch Terminal Type

knife blade

Switch Voltage Rating And Type In Volts

32.0 ac and 32.0 dc

Switch Contact Arrangement

single pole, single throw, normally closed

Switch Current Rating And Type In Amps

0.1 ac

Terminal Type And Quantity

1 tab w/screw

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay single location

Trip Release Method

magnetic single location

Trip Delay Time In Seconds Per Rated Continuous Current

0.300 minimum at 135 pct and 7.000 maximum at 135 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

135.0 single location

Ultimate Trip Time Per Pole In Seconds

7.000 nominal single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-446-4789?

   The FSCG of the NSN 5925-01-446-4789 is 5925

2. Does the NSN 5925-01-446-4789 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-446-4789 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-446-4789 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-446-4789 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-446-4789 was assigned to the Federal Catalog?

   It was assigned 29 years ago, on Thu, Jul 3, 1997