NSN PS232196-06

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

transparent;green; t-1 3/4 miniature flange base,8 milliamps; 3.0 watts nominal; 120 volts; o/a dim. 0.625 in. lg; 0.280 in. min,0.290 in. max dia; humidity,shock and vibration resistant general characteristics item description, support equipment,f-111 aircraft end item identification.

NSN 6240-01-298-4644 Datasheet

(NSN) National Stock Number

6240-01-298-4644

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6240 - Electric Lamps

(NIIN) National Item Identification Number

01-298-4644

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Mon, Apr 17, 1989

End Item Identification

support equipment,f-111 aircraft

General Characteristics Item Description

transparent;green; t-1 3/4 miniature flange base,8 milliamps; 3.0 watts nominal; 120 volts; o/a dim. 0.625 in. lg; 0.280 in. min,0.290 in. max dia; humidity,shock and vibration resistant

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1042206

Cross Reference

CAGE Codes

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

98750

San Antonio Air Logistics Center

U.s./canadian manufacturers

8Z410

Ledtronics, Inc. Dba Ledtronics Inc

U.s./canadian manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

35181

Cae Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Questions & Answers

1. What is the FSCG of the NSN 6240-01-298-4644?

   The FSCG of the NSN 6240-01-298-4644 is 6240

2. Does NSN 6240-01-298-4644 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6240-01-298-4644 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6240-01-298-4644 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6240-01-298-4644 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Mon, Apr 17, 1989