NSN PSF100A-6C

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

1.000 inches nominal body length, 6.00 actuation point nominal inches of water contact stimulus rating, unable to decode contact load current rating, increase contact action stimulus, actuation point not adjustable contact adjustability.

NSN 5930-01-043-5290 Datasheet

(NSN) National Stock Number

5930-01-043-5290

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-043-5290

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Sat, Jun 25, 1977

Schedule B Code

8536509065

Body Length

1.000 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

actuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

6.00 actuation point nominal inches of water

Contact Voltage Rating In Volts

unable to decode

Longest Horizontal Distance Between Mounting Centers

0.719 inches nominal

Longest Vertical Distance Between Mounting Centers

0.719 inches nominal

Media For Which Designed

gas

Mounting Facility Pattern

four position rectangular

Mounting Method

base and unthreaded hole(s)

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, double make, momentary action

Outside Diameter

Overall Height

0.478 inches nominal

Overall Length

1.750 inches nominal

Overall Width

1.312 inches nominal

Precious Material And Location

contacts gold

Precious Material

gold

Pressure Connector Type

unable to decode

Pressure Switch Type

differential

Proof Pressure

15.00 pounds per square inch gage

Style Designator

rectangular

Terminal Type

quick disconnect, male

Unthreaded Mounting Hole Diameter

0.125 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

81997

Eaton Corp Controls Div

U.s./canadian manufacturers

0C579

World Magnetics Company Llc

U.s./canadian manufacturers

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

60426

Genesis Lamp Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-043-5290?

   The FSCG of the NSN 5930-01-043-5290 is 5930

2. Does the NSN 5930-01-043-5290 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-043-5290 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-043-5290 contain precious materials?

   Item contains gold.

5. Does NSN 5930-01-043-5290 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-043-5290 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Sat, Jun 25, 1977