NSN PUG2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

6675-00-910-5468, point transfer devi.

NSN 6675-00-910-5468 Datasheet

(NSN) National Stock Number

6675-00-910-5468

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6675 - Mapping Instruments, Surveying and Drafting

(NIIN) National Item Identification Number

00-910-5468

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Jan 1, 1960

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1440869

Cross Reference

CAGE Codes

35643

Leica Geosystems Inc.

Non-manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 6675-00-910-5468?

   The FSCG of the NSN 6675-00-910-5468 is 6675

2. Does NSN 6675-00-910-5468 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6675-00-910-5468 contain precious materials?

   Precious metal content is unknown

4. Does NSN 6675-00-910-5468 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6675-00-910-5468 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960