NSN PX3773

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

murphy diesel model me-engs end item identification, consists of snap wire no.103940;washer no.101446;flexible seal no.101447;spring guide no.106356;spring no.101449;clamp ring no.101450;0.812 in.installed @lg;for use w/1.000 in.dia shaft general characteristics item description.

NSN 5330-00-429-2467 Datasheet

(NSN) National Stock Number

5330-00-429-2467

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-429-2467

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Jan 1, 1963

Schedule B Code

8487900040

End Item Identification

murphy diesel model me-engs

General Characteristics Item Description

consists of snap wire no.103940;washer no.101446;flexible seal no.101447;spring guide no.106356;spring no.101449;clamp ring no.101450;0.812 in.installed @lg;for use w/1.000 in.dia shaft

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1514393

Cross Reference

CAGE Codes

76558

Mwm-Murphy Diesel Co

U.s./canadian manufacturers

54641

Lear Siegler Inc Sherwood Div

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

8487-90-0040

Description

oil seals, other than those of chapter 40, machinery parts not containing electrical features

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74999

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-00-429-2467?

   The FSCG of the NSN 5330-00-429-2467 is 5330

2. Does the NSN 5330-00-429-2467 have a Schedule B code assigned?

   Yes, the Schedule B code is 8487900040

3. Does NSN 5330-00-429-2467 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-00-429-2467 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-00-429-2467 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-00-429-2467 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963