NSN R10-E1-W2-V52

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

0.975 cubic inches cubic measure, continuous duty type, dustproof environmental protection, 1 coil quantity, 2.2 watts energizing element power rating.

NSN 5945-01-021-7185 Datasheet

(NSN) National Stock Number

5945-01-021-7185

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-021-7185

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Tue, May 18, 1976

Schedule B Code

8536490050

Coil Quantity

1

Cubic Measure

0.975 cubic inches

Duty Type

continuous

Energizing Element Power Rating

2.2 watts

Environmental Protection

dustproof

Fragility Factor

moderately rugged

Main Contact Load Current Rating At Maximum Rated Voltage

Main Contact Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Material

plastic case

Material

silver contact

Mounting Facility Type And Quantity

1 threaded stud(s) single mounting facility

Nominal Thread Size

unable to decode

Nonpile-Up Main Contact Arrangement

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

1.397 inches maximum

Overall Length

0.950 inches maximum

Overall Width

0.735 inches maximum

Precious Material And Location

contacts silver and contact surfaces gold

Precious Material

silver and gold

Storage Type

general purpose warehouse

Surface Treatment

gold contact

Terminal Type And Quantity

unable to decode

Thread Class

unable to decode

Thread Direction

unable to decode

Thread Length

unable to decode

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Winding Dc Resistance Rating

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

77342

Te Connectivity Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0050

Description

relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-01-021-7185?

   The FSCG of the NSN 5945-01-021-7185 is 5945

2. Does the NSN 5945-01-021-7185 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490050

3. Does NSN 5945-01-021-7185 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-021-7185 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5945-01-021-7185 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-021-7185 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, May 18, 1976