NSN R75PR4100AA30K

A specific electrical element or set of electrical elements that are connected together to form a fixed arrangement and used as a substitute load for terminating an electrical circuit. A dummy load contains all the essential electrical characteristics necessary to terminate the circuit but does not function in the same manner as the load which it replaces. Examples are resistors used to replace antennas, batteries, loudspeakers, or the like. Includes single port terminations of twin lead, coaxial and waveguide transmission lines as low power terminations of a section of a transmission system in a specified manner. Includes dummy loads when arranged in a group or bank. Excludes:power absorbers. See also load bank, electrical.

12.3 millimeters minimum and 13.2 millimeters maximum body width, without mounting facilities, terminal(s) on one surface body style, 21.3 millimeters minimum and 22.1 millimeters maximum body height, 31.3 millimeters minimum and 32.3 millimeters maximum body length, 1000000.0 picofarads single section or 1000.0 nanofarads single section capacitance value per section.

NSN 5910-01-707-9161 Datasheet

(NSN) National Stock Number

5910-01-707-9161

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-707-9161

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Fri, Mar 3, 2023

Schedule B Code

8532250080

Body Height

21.3 millimeters minimum and 22.1 millimeters maximum

Body Length

31.3 millimeters minimum and 32.3 millimeters maximum

Body Style

without mounting facilities, terminal(s) on one surface

Body Width

12.3 millimeters minimum and 13.2 millimeters maximum

Capacitance Value Per Section

1000000.0 picofarads single section or 1000.0 nanofarads single section

Case Insulation Material

plastic

Dielectric Material

plastic polypropylene

Features Provided

rohs directive compliance

Material

plastic case

Part Name Assigned By Controlling Agency

r75, single metallized polypropylene film, radial, dc and pulse applications (automotive grade)

Nonderated Operating Temp

85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

630.0 dc single section and 250.0 ac-peak single section

Reference Temp At Which Rated

85.0 celsius

Reliability Indicator

established

Section Quantity

1

Special Features

rohs compliance. lead-free termination. aa code = packaging: bulk (tray) - short leads, 4 mm (plus 2.0/minus 0). 480 per package. dielectric = polypropylene film. plates = metal layer deposited by evaporation under vacuum. winding = non-inductive type. leads = tinned wire. protection = plastic case, thermosetting resin filled. box material is solvent resistant and flame retardant according to ul94. operating temperature: -55.0 to 105.0 deg c. r code = lead spacing: 27.5 mm. climatic category: 55/105/56 iec 60068-1.

Specification/Standard Data

iec 60384-16:2019 international std/spec

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

200.0 single section

Terminal Diameter

0.75 millimeters minimum and 0.85 millimeters maximum

Terminal Length

4.0 millimeters minimum and 6.0 millimeters maximum

Terminal Type And Quantity

2 pin

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-100.0 to 100.0 single section

Tolerance Range Per Section

-10.0 to 10.0 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

31433

Kemet Electronics Corporation

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-707-9161?

   The FSCG of the NSN 5910-01-707-9161 is 5910

2. Does the NSN 5910-01-707-9161 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-707-9161 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-707-9161 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-707-9161 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-707-9161 was assigned to the Federal Catalog?

   It was assigned 3 years ago, on Fri, Mar 3, 2023