NSN REBDC

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

approx 10.500 ft extended lg general characteristics item description.

NSN 4240-00-941-1341 Datasheet

(NSN) National Stock Number

4240-00-941-1341

(FSG) Federal Supply Group

42 - Firefighting, Rescue, and Safety Equipment; and Environmental Protection Equipment and Materials

(FSC) Federal Supply Classification

4240 - Safety and Rescue Equipment

(NIIN) National Item Identification Number

00-941-1341

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, Nov 27, 1965

General Characteristics Item Description

approx 10.500 ft extended lg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1580224

Cross Reference

CAGE Codes

18355

The Boeing Company

U.s./canadian manufacturers

09729

E. D. Bullard Company Dba Ed Bullard Co

U.s./canadian manufacturers

Freight Information

Air Commodity

KZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

10960

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

023340

Questions & Answers

1. What is the FSCG of the NSN 4240-00-941-1341?

   The FSCG of the NSN 4240-00-941-1341 is 4240

2. Does NSN 4240-00-941-1341 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 4240-00-941-1341 contain precious materials?

   Precious metal content is unknown

4. Does NSN 4240-00-941-1341 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 4240-00-941-1341 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Sat, Nov 27, 1965