NSN RER50F7R50M

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.062 inches nominal body length, 275.0 ambient temp in deg celsius at zero percent rated power, 0.531 inches nominal body width, 25.0 celsius ambient temp at full rated power, 0.562 inches nominal body height.

NSN 5905-01-213-4128 Datasheet

(NSN) National Stock Number

5905-01-213-4128

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-213-4128

Requires Demilitarization

Yes

(INC) Item Name Code

37404

Date

Thu, Jul 25, 1985

Schedule B Code

8533390080

Ambient Temp At Full Rated Power

25.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

275.0

Body Height

0.562 inches nominal

Body Length

1.062 inches nominal

Body Width

0.531 inches nominal

Cubic Measure

0.317 cubic inches

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.719 inches nominal

Electrical Resistance

7.500 ohms

Inclosure Type

encased

Mounting Hole Size

0.125 inches nominal

Power Dissipation Rating In Watts

8.000 free air

Reactance Characteristic

noninductive

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Resistance Tolerance In Percent

-1.000 to 1.000

Specification/Standard Data

81349-mil-r-39009/2 government specification

Style Designator

axial terminal (s)

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-50.0 to 50.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 275.0

Terminal Length

0.438 inches nominal

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-r-39009 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unpackaged Unit Weight

16.5 grams nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037404

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-213-4128?

   The FSCG of the NSN 5905-01-213-4128 is 5905

2. Does the NSN 5905-01-213-4128 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-01-213-4128 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-213-4128 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-213-4128 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-213-4128 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Jul 25, 1985