NSN RF0307

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5985-00-894-3404, electrical dummy load.

NSN 5985-00-894-3404 Datasheet

(NSN) National Stock Number

5985-00-894-3404

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-894-3404

Requires Demilitarization

Yes

(INC) Item Name Code

00335

Date

Mon, Jan 1, 1962

Schedule B Code

9030330080

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000335

Cross Reference

CAGE Codes

14028

Sypris Electronics, Llc

U.s./canadian manufacturers

60674

Microwave Devices Inc

U.s./canadian manufacturers

58167

Palco Connector Inc.

U.s./canadian manufacturers

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

02660

Amphenol Corp Spectra-Strip/itd

U.s./canadian manufacturers

13511

Amphenol Cadre Div Bunker Ramo Corp

U.s./canadian manufacturers

30684

Airgas Safety, Inc. Dba Airgas

Non-manufacturers

74868

Amphenol Corporation Div Amphenol Rf

U.s./canadian manufacturers

77820

Amphenol Corp Div Amphenol Aerospace Operations

U.s./canadian manufacturers

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

03538

Lockheed Martin Corporation Div Rms

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

07497

Essex Group Inc Telecommunication Products Div

U.s./canadian manufacturers

94375

Lax Electronics, Inc. Dba Automatic Connector Div Automatic Connector

U.s./canadian manufacturers

80058

Joint Electronics Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

91836

Winchester Interconnect Corporation

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

92180

Winchester Interconnect Rf Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

9030-33-0080

Description

instruments and apparatus for measuring or checking power, without a recording device, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87475

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 5985-00-894-3404?

   The FSCG of the NSN 5985-00-894-3404 is 5985

2. Does the NSN 5985-00-894-3404 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030330080

3. Does NSN 5985-00-894-3404 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-00-894-3404 contain precious materials?

   Item contains gold.

5. Does NSN 5985-00-894-3404 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-894-3404 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962