NSN RF09866

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

metal body material, 0.960 inches nominal distance between centerlines of mounting facilities parallel to body width, 1.180 inches maximum body height, 1.265 inches maximum body width, 1.765 inches maximum body length.

NSN 5915-01-115-7321 Datasheet

(NSN) National Stock Number

5915-01-115-7321

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-115-7321

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Sun, Jul 12, 1981

Schedule B Code

8527995030

Body Height

1.180 inches maximum

Body Length

1.765 inches maximum

Body Material

metal

Body Width

1.265 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.960 inches nominal

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.460 inches nominal

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

hermetically sealed

Load Impedance Per Function

50.0 ohms blank

Maximum Voltage Drop Per Function

400.0 millivolts dc blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded hole(s)

Nominal Thread Size

0.138 inches

Operating Current Rating Per Function In Amps

3.0 blank

Operating Voltage Rating And Type Per Function

100.0 volts dc blank

Operating Temp Range

-65.0 to 100.0 celsius

Overall Height

1.420 inches maximum

Overall Length

1.985 inches maximum

Principal Circuitry Type Per Function

inductance-capacitance blank

Source Impedance Rating Per Function

50.0 ohms blank

Style Designator

rectangular terminal/terminals on two surfaces

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

70210

Honeywell International Inc. Div Aerospace - Torrance

U.s./canadian manufacturers

13619

Ems Development Corporation Dba Ems Development Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-115-7321?

   The FSCG of the NSN 5915-01-115-7321 is 5915

2. Does the NSN 5915-01-115-7321 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-115-7321 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-115-7321 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-115-7321 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-115-7321 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Sun, Jul 12, 1981