NSN RFC-3S.90

An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or printed wiring board and is not designed to be mounted on a bulkhead, chasses, panel, printed wiring board, or the like. Excludes:jack, telephone; jack, tip; plug, telephone; plug tip; insert, electrical connector; connector body (as modified); and socket, plug-in, electronic components. See also lead assembly, electrical; wiring harness (as modified); and cable assembly (as modified). For items without inserts, see shell, electrical connector.

unable to decode inductance rating, unable to decode coil form type, 0.406 inches minimum and 0.469 inches maximum body length, unable to decode core construction, unable to decode dc resistance rating in ohms.

NSN 5950-01-024-4260 Datasheet

(NSN) National Stock Number

5950-01-024-4260

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-024-4260

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Sun, Jul 11, 1976

Schedule B Code

8504500000

Body Length

0.406 inches minimum and 0.469 inches maximum

Coil Form Type

unable to decode

Core Construction

unable to decode

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

105.0 celsius

Mounting Method

unable to decode

Overall Diameter

0.156 inches minimum and 0.219 inches maximum

Quality Factor

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Specification/Standard Data

96906-ms75101 government standard

Terminal Type And Quantity

2 wire lead

Test Data Document

"81349-mil-c-15305 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

99800

American Precision Industries Inc.

U.s./canadian manufacturers

71279

Interconnection Products Inc

U.s./canadian manufacturers

59474

Jeffers Electronics Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

72259

Nytronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-024-4260?

   The FSCG of the NSN 5950-01-024-4260 is 5950

2. Does the NSN 5950-01-024-4260 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-024-4260 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-024-4260 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-024-4260 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-024-4260 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Sun, Jul 11, 1976