NSN RI0T-D

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

white lens color, medium prefocus lamp base type accommodated, lever twist lock control special features, 1 incandescent lamp type accommodated and quantity, unable to decodeunable to decode lens surface condition.

NSN 6230-01-352-8045 Datasheet

(NSN) National Stock Number

6230-01-352-8045

(FSG) Federal Supply Group

62 - Lighting Fixtures and Lamps

(FSC) Federal Supply Classification

6230 - Electric Portable and Hand Lighting Equipment

(NIIN) National Item Identification Number

01-352-8045

Requires Demilitarization

Yes

(INC) Item Name Code

13193

Date

Fri, Jan 31, 1992

Schedule B Code

9405400000

Lamp Base Type Accommodated

medium prefocus

Lamp Type Accommodated And Quantity

1 incandescent

Lens Color

white

Lens Surface Condition

unable to decodeunable to decode

Special Features

lever twist lock control

Surface Treatment

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013193

Cross Reference

CAGE Codes

10741

Carlisle & Finch Co

U.s./canadian manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

56020

Water Commodity

761 - Electric lamps

National Motor Freight Classification Item Number

109110

Questions & Answers

1. What is the FSCG of the NSN 6230-01-352-8045?

   The FSCG of the NSN 6230-01-352-8045 is 6230

2. Does the NSN 6230-01-352-8045 have a Schedule B code assigned?

   Yes, the Schedule B code is 9405400000

3. Does NSN 6230-01-352-8045 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6230-01-352-8045 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6230-01-352-8045 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6230-01-352-8045 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Fri, Jan 31, 1992