NSN RN60D1070F

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

125.0 celsius ambient temp at full rated power, 175.0 ambient temp in deg celsius at zero percent rated power, 107.000 ohms electrical resistance, 0.375 inches nominal body length, 0.125 inches nominal body diameter.

NSN 5905-00-112-1281 Datasheet

(NSN) National Stock Number

5905-00-112-1281

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-112-1281

Requires Demilitarization

Yes

(INC) Item Name Code

05311

Date

Sun, Jan 21, 1973

Schedule B Code

8533100042

Ambient Temp At Full Rated Power

125.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

175.0

Body Diameter

0.125 inches nominal

Body Length

0.375 inches nominal

Electrical Resistance

107.000 ohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

0.125 free air

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Resistance Tolerance In Percent

-1.000 to 1.000

Style Designator

axial terminal each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-100.0 to 100.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 175.0

Terminal Type

wire lead

Test Data Document

"81349-milr55182 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0005311

Cross Reference

CAGE Codes

28480

Hewlett-Packard Company Dba Hp

U.s./canadian manufacturers

19701

North American Philips Corp Philips Components Discrete Products Div

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0042

Description

fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-112-1281?

   The FSCG of the NSN 5905-00-112-1281 is 5905

2. Does the NSN 5905-00-112-1281 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100042

3. Does NSN 5905-00-112-1281 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-112-1281 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-00-112-1281 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-112-1281 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sun, Jan 21, 1973