NSN RN70C2102F

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

21.000 kilohms electrical resistance, 175.0 ambient temp in deg celsius at zero percent rated power, 0.250 inches nominal body diameter, 0.750 inches nominal body length, 125.0 celsius ambient temp at full rated power.

NSN 5905-00-752-7119 Datasheet

(NSN) National Stock Number

5905-00-752-7119

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-752-7119

Requires Demilitarization

Yes

(INC) Item Name Code

05311

Date

Mon, Jan 1, 1962

Schedule B Code

8533100042

Ambient Temp At Full Rated Power

125.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

175.0

Body Diameter

0.250 inches nominal

Body Length

0.750 inches nominal

Electrical Resistance

21.000 kilohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

0.500 free air

Reliability Indicator

not established

Resistance Tolerance In Percent

-1.000 to 1.000

Style Designator

axial terminal each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-50.0 to 50.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 175.0

Terminal Type

wire lead

Test Data Document

"81349-mil-r-10509/3 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0005311

Cross Reference

CAGE Codes

88818

Kearfott Corporation Div Guidance and Navigation Division

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8533-10-0042

Description

fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-752-7119?

   The FSCG of the NSN 5905-00-752-7119 is 5905

2. Does the NSN 5905-00-752-7119 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100042

3. Does NSN 5905-00-752-7119 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-752-7119 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-752-7119 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-752-7119 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962