NSN RNR55C2182BS

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

4920nce399565 end item identification, 0.078 inches minimum and 0.140 inches maximum body diameter, 0.204 inches minimum and 0.281 inches maximum body length, 175.0 ambient temp in deg celsius at zero percent rated power, 125.0 celsius ambient temp at full rated power.

NSN 5905-01-333-3863 Datasheet

(NSN) National Stock Number

5905-01-333-3863

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-333-3863

Requires Demilitarization

Yes

(INC) Item Name Code

05311

Date

Fri, Feb 1, 1991

Schedule B Code

8533100042

End Item Identification

4920nce399565

Ambient Temp At Full Rated Power

125.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

175.0

Body Diameter

0.078 inches minimum and 0.140 inches maximum

Body Length

0.204 inches minimum and 0.281 inches maximum

Electrical Resistance

21.800 kilohms

Inclosure Type

hermetically sealed

Power Dissipation Rating In Watts

0.100 free air

Reliability Failure Rate Level In Percent

0.001

Reliability Indicator

established

Resistance Tolerance In Percent

-0.100 to 0.100

Specification/Standard Data

81349-mil-r-55182/1 government specification

Style Designator

axial terminal each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-50.0 to 50.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 175.0

Terminal Length

1.000 inches minimum and 1.625 inches maximum

Terminal Type

wire lead

Test Data Document

"81349-mil-r-55182 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0005311

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0042

Description

fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-333-3863?

   The FSCG of the NSN 5905-01-333-3863 is 5905

2. Does the NSN 5905-01-333-3863 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100042

3. Does NSN 5905-01-333-3863 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-333-3863 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-333-3863 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-333-3863 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, Feb 1, 1991