NSN RO0087

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

4.560 inches nominal aperture diameter, separable features provided, 30 lamination quantity, laminated construction, 0.002 inches nominal lamination thickness.

NSN 5365-00-536-5371 Datasheet

(NSN) National Stock Number

5365-00-536-5371

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5365 - Bushings, Rings, Shims and Spacers

(NIIN) National Item Identification Number

00-536-5371

Requires Demilitarization

Yes

(INC) Item Name Code

20349

Date

Sun, Sep 22, 1974

Schedule B Code

7507200000

Aperture Diameter

4.560 inches nominal

Construction

laminated

Features Provided

separable

Lamination Quantity

30

Lamination Thickness

0.002 inches nominal

Material Document And Classification

qq-a-318 fed spec 1st material response or qq-a-561 fed spec 2nd material response

Material

aluminum alloy 5052 or aluminum alloy 1100

Outside Diameter

6.620 inches nominal

Special Test Features

special quality control testing

Test Data Document

"81349-mil-s-22499 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0020349

Cross Reference

CAGE Codes

04804

Northrop Grumman Systems Corporation Div Marine Systems

U.s./canadian manufacturers

53711

Naval Sea Systems Command

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

13873

Dla Aviation Engineering Div Department of Defense

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

7507-20-0000

Description

tube or pipe fittings of nickel

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

68322

(NAICS) North American Industrial Classification System

332919

Questions & Answers

1. What is the FSCG of the NSN 5365-00-536-5371?

   The FSCG of the NSN 5365-00-536-5371 is 5365

2. Does the NSN 5365-00-536-5371 have a Schedule B code assigned?

   Yes, the Schedule B code is 7507200000

3. Does NSN 5365-00-536-5371 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5365-00-536-5371 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5365-00-536-5371 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5365-00-536-5371 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Sep 22, 1974