NSN RR4000D2C8H502

A circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. It may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. Excludes:felt items but includes multimaterial items in which one of the materials is felt. For solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. For rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. For circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. Excludes:cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.

70.0 single section ambient temp in deg celsius per section at full rated power, 125.0 single section ambient temp in deg celsius per section at zero percent rated power, stops actuator travel control feature, single shaft actuator type, flow drawer end item identification.

NSN 5905-01-240-9175 Datasheet

(NSN) National Stock Number

5905-01-240-9175

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-240-9175

Requires Demilitarization

Yes

(INC) Item Name Code

37408

Date

Sat, Sep 20, 1986

Schedule B Code

8533390080

End Item Identification

flow drawer

Actuator Travel Control Feature

stops

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

70.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

125.0 single section

Bearing Type

sleeve shaft

Body Diameter

0.875 inches nominal

Body Length

1.500 inches maximum

Body Style

cylindrical bushing mounted

Cubic Measure

2.761 cubic inches

Effective Electrical Rotation In Deg Angular Rotation

3600.0 nominal

Electrical Resistance Per Section

5.000 kilohms single section

Function Characteristic Per Section

single section linear

Function Conformity Per Section

single section independent linearity

Function Conformity Tolerance Per Section

-0.50 to 0.50 single section

Lateral Runout

0.002 inches

Pilot Diameter Runout

0.00100 inches

Maximum Running Torque

0.60 inch-ounces

Maximum Starting Torque

0.70 inch-ounces

Maximum Stop Torque

48.00 inch-ounces

Mechanical Backlash In Deg Angular Rotation

1.5

Mounting Bushing Length

0.313 inches nominal

Mounting Method

standard bushing

Nonturn Device Location

at 12 oclock

Nonturn Device Radius

0.302 inches nominal

Overall Diameter

1.250 inches nominal

Overall Length

2.250 inches nominal

Power Dissipation Rating Per Section In Watts

2.0 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-3.0 to 3.0 single section

Rotary Actuator Travel In Angular Deg

3600.0 nominal

Screw Thread Diameter

0.250 inches nominal

Screw Thread Quantity Per Inch

32.0

Screw Thread Series Designator

unef

Section Quantity

1

Shaft End Play

0.00500 inches

Shaft Diameter

0.125 inches nominal

Shaft Radial Play

0.002 inches

Shaft Runout

0.002 inches

Shaft Style

round, slotted

Shaft Length

0.750 inches nominal

Specification/Standard Data

81349-mil-r-12934/31 government specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-100.0 to 100.0 single section

Terminal Location

radially positioned over less than half the circumference

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-r-12934 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037408

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-240-9175?

   The FSCG of the NSN 5905-01-240-9175 is 5905

2. Does the NSN 5905-01-240-9175 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-01-240-9175 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5905-01-240-9175 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-240-9175 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-240-9175 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Sat, Sep 20, 1986