NSN RT10C2L102

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

stops actuator travel control feature, single shaft actuator type, 0.490 inches minimum and 0.510 inches maximum body height, 85.0 single section ambient temp in deg celsius per section at full rated power, 150.0 single section ambient temp in deg celsius per section at zero percent rated power.

NSN 5905-00-052-1794 Datasheet

(NSN) National Stock Number

5905-00-052-1794

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-052-1794

Requires Demilitarization

Yes

(INC) Item Name Code

37406

Date

Sun, Jan 1, 1961

Schedule B Code

8533390080

Actuator Travel Control Feature

stops

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

85.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

150.0 single section

Body Height

0.490 inches minimum and 0.510 inches maximum

Body Length

1.000 inches nominal

Body Width

0.182 inches minimum and 0.197 inches maximum

Body Style

rectangular w/mounting holes

Contact Arm Electrical Off Position

fully cw

Effective Electrical Rotation In Deg Angular Rotation

7200.0 minimum and 16200.0 maximum

Electrical Resistance Per Section

1.0 kilohms single section

Lateral Distance Between Mounting Hole Centers

0.513 inches minimum and 0.526 inches maximum

Maximum Starting Torque

8.00 inch-ounces

Mounting Facility Quantity

2

Mounting Hole Diameter

0.090 inches minimum and 0.098 inches maximum

Mounting Method

unthreaded hole(s)

Overall Height

0.490 inches minimum and 0.510 inches maximum

Overall Length

1.050 inches nominal

Overall Width

0.182 inches minimum and 0.197 inches maximum

Power Dissipation Rating Per Section In Watts

0.75 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-5.0 to 5.0 single section

Rotary Actuator Travel In Angular Deg

7200.0 minimum and 16200.0 maximum

Section Quantity

1

Shaft Diameter

0.115 inches nominal

Shaft Style

round, slotted

Shaft Length

0.050 inches nominal

Specification/Standard Data

81349-mil-r-27208/1 government specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-50.0 to 50.0 single section

Terminal Location

rear end

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-r-27208 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0037406

Cross Reference

CAGE Codes

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-052-1794?

   The FSCG of the NSN 5905-00-052-1794 is 5905

2. Does the NSN 5905-00-052-1794 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-00-052-1794 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-052-1794 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-00-052-1794 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-052-1794 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961