NSN RT24C2P101

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

150.0 single section ambient temp in deg celsius per section at zero percent rated power, 0.360 inches minimum and 0.390 inches maximum body length, 0.145 inches minimum and 0.245 inches maximum body height, single shaft actuator type, 85.0 single section ambient temp in deg celsius per section at full rated power.

NSN 5905-00-177-7369 Datasheet

(NSN) National Stock Number

5905-00-177-7369

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-177-7369

Requires Demilitarization

Yes

(INC) Item Name Code

37406

Date

Fri, Oct 3, 1969

Schedule B Code

8533390080

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

85.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

150.0 single section

Body Height

0.145 inches minimum and 0.245 inches maximum

Body Length

0.360 inches minimum and 0.390 inches maximum

Body Width

0.360 inches minimum and 0.390 inches maximum

Body Style

rectangular

Center To Center Distance Between Center Terminal And Outside Terminal

0.100 inches nominal

Center To Center Distance Between Terminals

0.200 inches nominal

Center To Center Distance Between Terminal Rows

0.100 inches nominal

Electrical Resistance Per Section

100.0 ohms single section

Mounting Method

terminal

Power Dissipation Rating Per Section In Watts

0.750 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-5.0 to 5.0 single section

Section Quantity

1

Shaft Diameter

0.050 inches minimum and 0.100 inches maximum

Shaft Style

round, slotted

Shaft Length

0.080 inches maximum

Specification/Standard Data

81349-mil-r-27208/9 government specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-50.0 to 50.0 single section

Terminal Location

right adjacent side two rows

Terminal Length

0.172 inches nominal

Terminal Type And Quantity

3 pin

Test Data Document

"81349-mil-r-27208 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037406

Cross Reference

CAGE Codes

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

H1418

Thales Cryogenics B.v.

Non-us manufacturer (nato), other foreign organization or codification bureaus

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-177-7369?

   The FSCG of the NSN 5905-00-177-7369 is 5905

2. Does the NSN 5905-00-177-7369 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-00-177-7369 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-177-7369 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-177-7369 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-177-7369 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Fri, Oct 3, 1969