NSN RT24C2P501

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

150.0 single section ambient temp in deg celsius per section at zero percent rated power, single shaft actuator type, 0.375 inches nominal body height, 85.0 single section ambient temp in deg celsius per section at full rated power, clutch actuator travel control feature.

NSN 5905-00-998-9232 Datasheet

(NSN) National Stock Number

5905-00-998-9232

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-998-9232

Requires Demilitarization

Yes

(INC) Item Name Code

37406

Date

Wed, Dec 6, 1967

Schedule B Code

8533390080

Actuator Travel Control Feature

clutch

Actuator Type

single shaft

Ambient Temp In Deg Celsius Per Section At Full Rated Power

85.0 single section

Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

150.0 single section

Body Height

0.375 inches nominal

Body Length

0.375 inches nominal

Body Width

0.195 inches nominal

Body Style

rectangular

Center To Center Distance Between Center Terminal And Outside Terminal

0.100 inches nominal

Center To Center Distance Between Terminals

0.200 inches nominal

Center To Center Distance Between Terminal Rows

0.100 inches nominal

Effective Electrical Rotation In Deg Angular Rotation

5400.0 minimum and 10800.0 maximum

Electrical Resistance Per Section

500.0 ohms single section

Mounting Method

terminal

Power Dissipation Rating Per Section In Watts

0.8 free air single section

Reliability Indicator

not established

Resistance Tolerance Per Section In Percent

-5.0 to 5.0 single section

Rotary Actuator Travel In Angular Deg

5400.0 minimum and 10800.0 maximum

Section Quantity

1

Shaft Diameter

0.075 inches nominal

Shaft Style

round, slotted

Shaft Length

0.080 inches maximum

Specification/Standard Data

81349-mil-r-27208/9 government specification

Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

-50.0 to 50.0 single section

Terminal Location

left adjacent side two rows

Terminal Length

0.172 inches minimum

Terminal Type And Quantity

3 pin

Test Data Document

"81349-mil-r-27208 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0037406

Cross Reference

CAGE Codes

96214

Raytheon Company Dba Raytheon

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-39-0080

Description

wirewound variable resistors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77233

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-998-9232?

   The FSCG of the NSN 5905-00-998-9232 is 5905

2. Does the NSN 5905-00-998-9232 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533390080

3. Does NSN 5905-00-998-9232 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-998-9232 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-998-9232 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-998-9232 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, Dec 6, 1967